(I) Cleaning and maintenance after laying/before use
1. Remove dust and debris on the floor surface first.
2. Use a floor scrubber with 3M red grinding disc or similar products to clean at low speed (dilute strong general-purpose cleaner with water at a ratio of 1:20 and add it to the floor scrubber), remove protective wax, grease, dust and other dirt on the floor surface, and use a water absorber to absorb the sewage.
3. Rinse with clean water and absorb dry.
4. Apply 1-2 layers of high-strength surface wax as needed.
Cleaning agent: strong general-purpose cleaner, high-strength surface wax
Tools: floor scrubber, red grinding disc, water absorber, wax mop, water squeezer
(II) Daily cleaning and maintenance
1. Push dust or vacuum cleaner. (Put the mop dust agent on the mop, and push dust after drying.)
2. Wet mop. (Dilute floor cleaning polish with water at a ratio of 1:20 and mop the floor with a semi-wet mop.) If necessary, you can also use a floor scrubber with wash & shine to clean at low speed.
Cleaning agent: floor mop dust agent floor cleaning polish
Tools: dust pusher mop
(III) Regular cleaning and maintenance
1. Dust or vacuum cleaner.
2. Dilute floor cleaning polish with water at a ratio of 1:20 and mop the floor or use a high-speed polisher with a red grinding disc for grinding.
3. Apply 1-2 layers of high-strength surface wax.
4. If necessary, you can use a high-speed polisher with a white polishing pad for polishing.
Cleaning agent: floor cleaning polisher high-strength surface wax
Tools: dust pusher floor grinder red and white grinding discs water absorber wax mop water squeezer
(IV) Thorough renovation
1. Dust or vacuum cleaner.
2. Dilute the strong wax removal water at 1:10 and apply it evenly on the floor. Wait for 5-10 minutes, and use a floor scrubber with a red grinding disc to clean and remove wax at low speed. Use a water absorber to absorb the sewage in time.
3. Rinse with clean water and absorb until there is no residual detergent left on the floor.
4. Apply 1-2 layers of high-strength surface wax as needed.
Cleaner: Floor cleaning polish High-strength surface wax
Tools: Dust pusher Floor grinder Red and white grinding discs Water absorber Wax drag water squeezer
(V) Treatment of special dirt
1. Oil stains: For local oil stains, pour the original liquid of water-based degreasing agent directly on a towel and wipe; for large-area oil stains, dilute the Weite water-based degreasing agent at 1:10 and use a floor scrubber with a red grinding disc to clean at low speed.
2. Black offset printing: Use spray cleaning maintenance wax with a high-speed polisher and a white polishing pad for polishing. For long-term black offset printing, you can pour the strong black offset printing remover directly on the towel and wipe it.
3. Glue or chewing gum: Pour a professional strong glue remover directly on the towel and wipe it off.
Cleaning agent: water-based degreasing agent, spray cleaning maintenance wax, strong black offset printing remover, strong glue remover.
Main materials of wall panels
Previous
Wallboard sound insulation effectPopular Products
Send Inquiry
